Arjohuntleigh Citadel Patient Therapy System C100 Скачать руководство пользователя

Страница: 7 / 48

Citadel Patient Therapy System

guidance. Consult a caregiver and carefully consider the use of bolsters,

upright position when the patient is unattended. Make sure a capable patient

knows how to get out of bed safely (and, if necessary, how to release the

guard against patient entrapment.

Skin Care

– Monitor skin conditions regularly and consider adjunct or

alternative therapies for high acuity patients. Give extra attention to skin

over any raised side bolster and to any other possible pressure points

and locations where moisture or incontinence may occur or collect. Early

intervention may be essential to preventing skin breakdown.

Maximum Recommended Patient Weight

- Total patient weight capacity

decrease the patient weight capacity of the bed. Contact ArjoHuntleigh

Customer Service for questions concerning the use of accessories and see

the Questions and Information section of this guide for contact information.

I.V. and Drainage Tubes

– Prior to activating any positioning or rotation

function assess the security of all invasive lines and tubes to accommodate

the desired angle of articulation and minimize the risk of binding,

slack for articulation and patient movement.

Turning

CAUTION

: Prior to engaging any mattress turn feature, ensure that

all side rails are fully engaged in their full upright and locked position.

Содержание Citadel Patient Therapy System C100

















































Результаты поиска

Содержание Citadel Patient Therapy System C100

Отзывы:

Похожие инструкции для Citadel Patient Therapy System C100

Бренды по названию

Популярные бренды

Arjohuntleigh Citadel Patient Therapy System C100, Инструкция по эксплуатации

Результаты поиска

Содержание Citadel Patient Therapy System C100

Отзывы:

Похожие инструкции для Citadel Patient Therapy System C100

Бренды по названию

Популярные бренды