Arjohuntleigh Citadel Patient Therapy System C100, Инструкция по эксплуатации

Страница: 33 / 48

33
Citadel Patient Therapy System
OPERATING INSTRUCTIONS
It is recommended that all chapters of this manual be reviewed prior to
product use. Carefully read the Contraindications, Risks and Precautions
and Safety Information sections in the Introduction chapter of this manual
prior to placing a patient on the Citadel Patient Therapy System.
Normal Therapy Mode
Control of set pressures for patient support (head, shoulders, body, feet and
Nurse Assist Functions
- lowers pressure in the seat section of mattress to zero. When
the pressure reaches 50% of the previous pressure setting, an audible tone
this function will not automatically time out.
- lowers pressure in the head section of mattress to zero.
When the pressure reaches 50% of the previous pressure setting, an audible
cancel; this function will not automatically time out.
the same time.
Firm Mattress - increases pressure to aid in lateral transfer. Pressing this
When the system reaches maximum pressure, an audible tone will sound.
return to previously selected pressure settings.
Turning - CAUTION : Prior to engaging any mattress turn
feature, make sure that bed frame has side rails and that all side
rails are fully engaged in their full upright and locked position.
Do not activate the turning feature on any mattress system when
patient restraints are in use.
Patient Turn (nurse assist)
patient right or left rotation of approximately 20 . An audible tone will sound
when full rotation has been achieved. In order to activate this function, all
side rails must be up and the fowler angle must be less than 30°. If a side rail
is lowered in the direction of the patient turn or the fowler angle is increased
to above 30°, this function will be cancelled. Press the Patient Center button
to cancel patient turn; this function will not automatically time out.