9
2. Insert the mains power plug into a suitable mains
power socket.
Cable Management
in Mattresses
The mains power cable should be put through one of the
cable management flaps which are on each side of the
mattress, as follows:
1. Locate one of the cable management flaps.
2. If necessary, open the press studs along the flap.
3. Run the mains power cable along the side of the
mattress securing the flap round the cable using the
press studs.
Connecting the
Tubeset
Make sure the mattress/seat tubeset is not “kinked” or
twisted, and push the tubeset connector firmly onto the
pump until it clicks into place.
Bed Foot-Rail
Swing-Out Hook
Mains Power Plug
