manualshive.com logo in svg

Arista 7300 Series, Быстрый старт

Поделиться
Скачать
Arista 7300 Series Скачать руководство пользователя страница 5

Chapter  1

Overview

1.1

 Scope

This guide is intended for properly trained service personnel and technicians who need to install Arista
Networks Data Center Switches.

This guide is intended for the following Arista Networks Data Center Switches:

DCS-7304

DCS-7304X3

DCS-7308

DCS-7308X3

DCS-7316

DCS-7324

DCS-7328

Important:  Only qualified personnel should install, service, or replace this equipment.

Seul le personnel qualifié doit installer, service, ou remplacer cet équipement.

1.2

 Receiving and Inspecting the Equipment

Upon receiving the switch, inspect the shipping boxes and record any external damage. Retain
packing materials if you suspect that part of the shipment is damaged; the carrier may need to inspect
them.

If the boxes were not damaged in transit, unpack them carefully. Ensure that you do not discard any
accessories that may be packaged in the same box as the main unit.

Inspect the packing list and confirm that you received all listed items. Compare the packing list with
your purchase order. 

Parts List

 provides a list of components included with the switch.

1.3

 Installation Process

The following tasks are required to install and use the switch:

1. Select and prepare the installation site (

Site Selection

).

2. Assemble the installation tools listed (

Tools Required for Installation

).

3. Attach the mounting brackets and install the switch in an equipment rack (

Two-Post Rack Mount 

).

4. Connect the switch to the power source and network devices (

 Powering the Modular Switch 

 and

Connecting Serial and Management Cables

).

5. Configure the switch (

Configuring the Switch

).

Important:  Class 1 Laser Product: This product has provisions to install Class 1 laser
transceivers that provides optical coupling to the communication network. Once a Class
1 laser product is installed, the equipment is a Class 1 Laser Product (Appareil à Laser
de Classe 1). The customer is responsible for selecting and installing the Class 1 laser
transceiver and for insuring that the Class 1 AEL (Allowable Emission Limit) per EN/IEC

1

Содержание 7300 Series



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды