manualshive.com logo in svg

Arista 7300 Series, Быстрый старт

Поделиться
Скачать
Arista 7300 Series Скачать руководство пользователя страница 37

Chapter  6

Configuring the Switch

Arista switches ship from the factory in Zero Touch Provisioning (ZTP) mode. ZTP configures the
switch without user intervention by downloading a startup configuration file or a boot script from a
location specified by a DHCP server. To manually configure a switch, ZTP is bypassed. The initial
configuration provides one username (admin) accessible only through the console port because it has
no password.

When bypassing ZTP, initial switch access requires logging in as admin, with no password, through
the console port. Then you can configure an admin password and other password protected
usernames.

This manual configuration procedure cancels ZTP mode, logs into the switch, assigns a password
to admin, assigns an IP address to the management port, and defines a default route to a network
gateway.

1. Provide power to the switch (

 Powering the Modular Switch 

).

2. Connect the console port to a PC (

Connecting Serial and Management Cables

).

As the switch boots without a startup-config file, it displays this message through the console:

The device is in Zero Touch Provisioning mode and is attempting to

download the startup-config from a remote system. The device will not

be fully functional until either a valid startup-config is downloaded

from a remote system or Zero Touch Provisioning is cancelled. To cancel

Zero Touch Provisioning, login as admin and type 'zerotouch cancel'

at the CLI.

localhost login:

3. Log into the switch by typing 

admin

 at the login prompt.

localhost login:admin

4. Cancel ZTP mode by typing 

zerotouch cancel

. IMPORTANT: This step initiates a switch

reboot.

localhost>zerotouch cancel

5. After the switch boots, log into the switch again by typing 

admin

at the login prompt.

Arista EOS

localhost login:admin

Last login: Fri Mar 15 13:17:13 on console

6. Enter global configuration mode.

localhost>enable

localhost#config

7. Assign a password to the admin username with the 

username secret

 command.

localhost(config)#username admin secret pxq123

8. Configure a default route to the network gateway.

localhost(config)#ip route 0.0.0.0/0 192.0.2.1

33

Содержание 7300 Series



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды