manualshive.com logo in svg

Arista 7300 Series, Быстрый старт

Поделиться
Скачать
Arista 7300 Series Скачать руководство пользователя страница 17

Chapter  3

Rack Mounting the Switch

Important:  The rack mounting procedure is identical for all modular switches. Illustrations in
this chapter depict the mounting of an unpopulated DCS-7304 chassis.

Les procédure de montage du bâti est identique pour tous les commutateurs modulaires.
Illustrations dans ce chapitre montrent le montage d’un châssis de DCS-7304 inhabité.

•

Two-Post Rack Mount 

 provides instructions for mounting the switch in a two-post rack.

•

Four-Post Rack Mount

 provides instructions for mounting the switch in a four-post rack.

After completing the instructions for your rack type, proceed to 

 Powering the Modular Switch 

.

3.1

 Two-Post Rack Mount

To mount the switch to a two-post rack, assemble mounting brackets to the middle of the chassis, then
attach the brackets to the rack.

Important:  Two-post rack mount parts are only available through your sales representative.
Two-post rack mounting is not supported for DCS-7316 switches.

Pièces de montage rack à deux montants sont uniquement disponibles par l’intermédiaire de
votre représentant des ventes. Montage en rack de deux-poteau n’est pas supporté pour les
commutateurs DCS-7316.

The accessory kit includes the following two-post mounting parts:

•

2 center-mount brackets.

•

16 (DCS-7304) or 20 (DCS-7308) M4x8 panhead Phillips screws.

3.1.1

 Attaching Mounting Brackets to the Chassis

1. Orient the switch chassis and the two center-mount brackets (

Figure 2: Attaching the Center-mount

Brackets

).

Figure 2: Attaching the Center-mount Brackets

Position the flanges that attach to the rack posts toward the front of the chassis.

13

Содержание 7300 Series



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды