9
B
C
D
A
A. Screws - 3.5 x 9.5 mm flat-head (4)
B. Cabinet (30” x 12” [76.2 cm x 30.5 cm] shown)
C. Face plate (30” x 12” [76.2 cm x 30.5 cm] shown)
D. Screws - 4.2 x 15 mm truss-head (2)
9.
Tighten all mounting screws to secure.
Connect the Vent System
Vented Installations
Connect the vent system to the range hood vent opening.
Seal the connection with clamps.
Non-Vented (recirculating) Installations
1.
Connect the vent system to the range hood vent opening.
Seal the connection with clamps.
2.
Install charcoal filters. See the “Available accesories” section.
Complete Installation
1.
Replace grease filters. See the “Range Hood Care” section.
WARNING:
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
2.
Plug 3-prong power cord into a grounded 3-prong outlet
located inside the cabinet above the range hood.
3.
Check the operation of the range hood fan and light. See
“Range Hood Use” section.
If range hood does not operate, check to see whether a
circuit breaker has tripped or a household fuse has blown.
Disconnect power and check wiring connections.
NOTE:
To get the most efficient use from your new range
hood, read the “Range Hood Use” section.
Range Hood Use
The range hood is designed to remove smoke, cooking vapors
and odors from the cooktop area. For best results, start the hood
before cooking and allow it to operate several minutes after
the cooking is complete to clear all smoke and odors from the
kitchen.
The hood controls are located on the center of the front of the
range hood liner.
Range Hood Controls
MODEL:
D
C
A
B
A. Blower and LED lamps controls
B. Grease filter
C. Grease filter handle
D. LED lamps
A
B
C
D
A. On/Off light button
B. Blower off and speed minimum button
C. Blower speed medium button
D. Blower speed maximum button
Operating the Light
The On/Off light button controls all lights. Press once for On and
again for Off.
Operating the Blower
The BLOWER SPEED buttons turn the blower on and control the
blower speed and sound level for quiet operation. The speed can
be changed anytime during fan operation by pressing the desired
blower speed button.
Press the BLOWER OFF button a second time to turn off the
blower.
