Ariens 932031 - ST524 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 29

Ariens 932031 - ST524 Скачать руководство пользователя страница 5

Rev. 8/97

Ariens

®

932 Series Sno-Thro

®

1

SECTION 1: INTRODUCTION

T

HE

M

ANUAL

Before operation of unit, carefully and
completely read your manuals. The
contents will provide you with an
understanding of safety instructions and

controls during normal operation and maintenance.

All reference to left, right, front, or rear are given from
operator standing in operation position and facing the
direction of forward travel.

S

ERVICE

AND

R

EPLACEMENT

P

ARTS

When ordering replacement parts or
making service inquiries, know the
Model and Serial numbers of your unit
and engine.

Numbers are located on the product
registration form in the unit literature
package. They are printed on a serial
number label, located on the frame of
your unit (Figure 1).

• Record Unit Model and Serial numbers here.

• Record Engine Model and Serial numbers here.

P

RODUCT

R

EGISTRATION

A warranty registration card must be
filled out by the Ariens dealer, signed,
and returned at time of sale. This form
activates the warranty.

The replacement of any part on this vehicle with anything
other than an Ariens authorized replacement part may
adversely affect the performance, durability, or safety of
this unit and may void the warranty. Claims meeting
requirements during limited warranty period will be
honored.

To guarantee full warranty service, make sure your
registration card has been returned to Ariens Company.

D

ISCLAIMER

Ariens Company is hereinafter referred to as Ariens.
Ariens reserves the right to discontinue, make changes
to, and add improvements upon its products at any time
without public notice or obligation. Ariens disclaims
liability for any claims or damages, whether regarding
property, personal injury or death arising out of the use of
unauthorized replacement parts. The descriptions and
specifications contained in this manual were in effect at
printing. Equipment described within this manual may
not be identified as either standard or optional.
Illustrations may not be applicable to your unit.

Customer Note:

Your Ariens Dealer has been provided

complete setup and preparation instructions which must
be completed prior to you taking delivery of this unit. The
dealer is required to review important information in this
manual with you before or upon delivery of the unit or
attachment.

OL1800

Transfer

model & serial

number label

from product

registration

here.

OL2160

Figure 1

Serial Number Label

OL1010

OS0520

«
...
3
4
5
6
7
...
»

Содержание 932031 - ST524






























Отзывы:

Нет отзывов