Page
7
Bezel Button Control Summary
Note that the 5 buttons located on the front bezel are designed to control LCD functions and do not interface
with the Android operating system.
2. Down (Auto)
4. Increase 6. Power LED
1
. Menu 3. Decrease
5. Source Hotkey/Exit 7. Power
Note: Your Argonaut A615 SMFD has been preset at the factory for optimal viewing either inside or
under direct sunshine. For most usage the power button, Dimming control buttons and signal input
hotkey are the primary items that may require adjustment. In the event settings have been changed
and you wish to restore the factory defaults, please follow the instructions to RESET the display to
factory defaults found later in this section.
1
Menu
Menu Key
2
Down (Auto)
Down Key (HOT Key: Auto Config.)
3
Decrease
Decrease Key, Left Key
4
Increase
Increase Key, Right Key
5
Source/Exit
Source Select & Exit HOT Key: Source Select
[Analog – DVI ]
6
Power LED
Amber: Display off in standby mode
Flashing Amber: Seeking input signal
Green: Display on with input signal
7
Power
Power On/Off
