Lens
Microphone
Soft AP
WPS / Reset
WPS/Reset Soft AP
Please Note:
If you used snapshot by the remote
control, the default storage path of
snapshot files are FTP server and SD
card.
Remote Control Description:
Temperature Deterction
Sensor
One Key Alert on
One Key Alert off
Speaker Volume Up
Speaker Volume Down
Left control
Snapshot
Night Lamp
Play/Stop Lullabies
Up Control
Right Control
Down Control
STRANGULATION
HAZARD!
Children have STRANGLED
in cords. Keep this cord out
of the reach of children
(more than 3ft(0.9m)away).
Do not remove this tag.
WARNING:
Power
Speaker
Temperature & Humidity
Detection Sensor
Night Lamp
Micro-SD Card Slot
Wi-Fi & System
Status Light
STRANGULATION
HAZARD!
Children have STRANGLED
in cords. Keep this cord out
of the reach of children
(more than 3ft(0.9m)away).
Do not remove this tag.
WARNING:
STRANGULATION
HAZARD!
Children have STRANGLED
in cords. Keep this cord out
of the reach of children
(more than 3ft(0.9m)away).
Do not remove this tag.
WARNING:
Warning Sticker
V2.1
Quick Installation Guide
Wireless HD Baby Monitor
FosBaby
FosBaby P1
Lens
Microphone
Soft AP
WPS / Reset
Speaker
Micro-SD Card Slot
Power
Wi-Fi Status Light
Warning Sticker
FosBaby
FosBaby P1
3
Download APP
2
Physical Description
1
Installation Notice
4
Add IP Camera
Make sure your wireless router is enabled DHCP, and connected to
internet
.
Make sure your smartphone is connected to your wireless router and
located near the camera.
Before you continue, please note:
To install the Foscam APP on your smartphone, you can choose either of
the following methods:
Foscam
If you have a QR Code APP on your smartphone, scan the code
below.
Scan QR code
Download from APP store
You can search the term “Foscam” directly on the APP Store or
Google Play Store. Then find the APP that appears with the same
icon as shown above, and install it to your smartphone.
Note:
If you fail to add your camera to smartphone for several times, press
the “Reset” button on the camera to reset it, and then try again.
1.
Connect the camera with power adapter, and wait for a moment,
until the camera plays a sound “Hello, Foscam”.
2.
Make sure your smartphone is connected to your wireless router.
3.
Run the Foscam APP on your smartphone, register a Foscam
Cloud account then log in. After the the camera plays the sound
”Ready for WiFi configuration”, please follow the steps below to add
your camera.
EZLink
WLAN:
WLAN Password
:
Connect your phone to Wi-Fi and input Wi-Fi
password for camera to connect.
NPU5YHSZSADVC59D111ABZZZ
doc
QR Code UID
CONNECT
EZLink
Please put the QR code within the frame. Put the
barcode outside the frame to avoid interference.
Album
Scan
Tap here
Tap here
Tap here
Scan the
QR code
The camera will
play a sound
“Wireless
Connection
Succeed” .
Enter your Wi-Fi
password.
Tap ‘+’ to add new camera
Add New Camera
My Cameras
Tap to scan QR Code
Please scan the QR code on
your camera to add.
Setup Wizard
轻触扫描二维码
√
Connection succeeded
！
Tap the camera in the list to
watch live video.
Setup Wizard
You can download the QIG in other languages from
http://www.foscam.com/download/QIG.html
.
Package Contents
Power Adapter
Mounting Bracket
IP Camera
USB Power Cable
Remote Control
(Fosbaby P1 only)
Watch strap
Temperature Detection
Sensor
Quick Installation Guide
Warranty Card
Warning Sticker
Quick Installation Guide
HD Wireless Baby Monitor
FosBaby
FosBaby P1
Security Warning
Please change the password of your camera regularly, and use the
combination of numbers, letters and special characters.
We recommend you to update your camera to the latest firmware
every three months, in order to ensure the safety of your camera and
have a better product experience.
Please keep the username and password of your camera safe, and do
not tell them to others.
