Subject to change · UM 045_14264401
· 0916 · EN
Page 4
www.argo-hytos.com
1. Intended purpose
1.1 Scope of use
›
To filter hydraulic fluid in the ‘by-pass flow’ on machinery and plant, taking account of the technical data
(see page 12).
›
To filter hydraulic fluids while filling machinery and plant, taking account of the technical data
(see page 12).
›
To transfer hydraulic fluids (e. g. waste oil, filter element is by passed) taking account of the technical data
(see page 12).
1.2 With UMP 045
›
To monitor the oil cleanliness in the “by-pass flow” while filling machinery and plant.
›
To switch off when the defined oil cleanliness has been reached.
1.3 Keeping to the permitted operating conditions
The permitted operating conditions must be mandatorily observed (see page 13).
DANGER
›
The manufacturer assumes no liability in the event of improper use or if any modifications are made to the device.
1.4 Reasonably foreseeable misuse
The conveying of the following media is prohibited:
›
High flammable fluids, such as petrol or thinners (explosion hazard).
›
Food
›
The device is not suitable for extracting oil sludge and residues.
