Subject to change · UM 045_14264401
· 0916 · EN
Page 17
www.argo-hytos.com
Installing the suction strainer
›
Always replace the O-ring when changing the filter element.
›
Attach the suction filter element (item 1) carefully into the pump block.
›
Screw in the locking screw and tighten it by hexagon socket screw key SW 22 (MA 25 ±2,5 Nm).
›
Check the tightness of the locking screw after starting operation and tighten it if necessary.
1
Illustration 10:
Installing the suction strainer
NOTE
›
Oil which accidently spilt onto the filter unit when changing the filter element may seem to be
leaked oil.
