17
7. Battery
The pedal-assisted bicycle starts and powers its electrical and electronic functions through the lithium-ion battery supplied
with the product, correctly recharged and installed.
A. Charging port for charger
B.
Residual battery charge indicator
Battery removal and insertion
The battery can be removed from the bike to prevent theft, for charging or to be stored in optimal conditions.
Press the + or – buttons to select the unit of measurement for the speed and travel data displayed on the display: International
metric system (Km/h and Km) or British imperial system (MPH and Mile)
P2 - User password ON/OFF display:
Available options = on / off
OFF = selecting “off”, confirmed by pressing the M button, excludes the user password request (identification code) to allow
the user to access and activate the display and allow full control of all the functions provided for the electrically power
assisted cycle.
The display controls and functions will be immediately accessible after pressing the ON button.
ON = by selecting the data "on", confirmed by pressing the M button, the configuration parameter is enabled which provides
for the activation of the display and access to all the functions provided for the complete management of the pedal-assisted
bicycle exclusively after entering a user password (identification code).
Display controls and functions, after pressing the ON button, will only be accessible after entering the user password
previously set (P3).
P3 - User password:
Parameter only displayed after the “ON” option has been selected which allows the user to enable the display access
configuration exclusively by entering the password (numeric identification code consisting of 4 digits) previously set and
confirmed as follows:
-
select the 4 digits which make up the password by pressing the + and - buttons and confirming them individually by
pressing the ON/OFF button
-
confirm the numeric identification code consisting of 4 numbers by pressing the M button.
0000 - System parameter setting password:
If incorrect data on the speed (Km/h and Km) and distance (MPH and Mile) are shown on the display, contact the after-sales
technical support service for assistance: www.argentobike.it/assistenza/