Page 4
CAUTIONS
Lightning
Unplug the PVS from the power outlet and disconnect any antenna or cable system
during a lightning storm or when it is left unattended and unused for long periods of
time. This helps prevent property damage and personal injury from lightning and
power line surges.
Power Lines
An outside antenna system should not be located in the vicinity of overheated power
lines or other electric light or power circuits, or where it can fall into power lines or
circuits. When installing an outside antenna system, extreme care should be taken to
keep from touching power lines or circuits…contact with them might be fatal.
Handling the LCD Panel
The LED and LCD panels are made of glass. Do NOT drop, hit, jolt, or press hard
against the panel. If the screen breaks, beware of sharp edges or broken glass.
Replacement parts
When replacement parts are required, make sure that the service technician uses
replacement parts have the same characteristics as the original part as specified by
the manufacturer. Unauthorized substitutions may result in fire, electric shock,
personal injury, or other hazards. Ask the service technician to perform routine
safety checks to determine the PVS is in correct operating condition after any service
or repair to this device.
Condensation
Moisture will form on the PVS if it is brought from cool surroundings into a warm
room or if the temperature of the room rises sudde
nly. When this happens, the PVS’s
performance may be impaired. To prevent this, allow the PVS to set in new
surroundings for one hour before switching on, or make sure that the room
temperature rises gradually. Condensation may also form during the summer if the
PVS is exposed to the breeze from an air conditioner. In such cases, change the
locations of the PVS.
Mobile Communication Devices
Phones and other mobile communication devices can cause interference with the
picture and/or sound quality. If you experience undesirable performance by this
appliance in close proximity to one of these devices, please relocate the device away
from the PVS a great enough distance to eliminate the undesired condition.
