Page 12
WIRED CONTROLLER
(Part Number PVSC)
1.
Video
Button (press to change the input source)
7.
Back
Button (press to go to the last viewed channel)
2.
Power
Button (press to turn the PVS on or off)
8.
Numbers 0 to 9
(press to enter channel numbers)
3.
Channel Up
Button
9.
Decimal
Button
(press to select digital sub-channels)
4.
Channel Down
Button
10.
Enter
Button
(press to enter selections)
5.
Volume Up
Button
11.
RJ45 Connector
(to connect cable to back of PVS)
6.
Volume Down
Button
12.
3.5mm Stereo Audio Jack
(plug headphone into
headphone jack to turn on the PVS. After unplugging
the headphone, the PVS powers off in several seconds.)
HEADPHONE JACK REPLACEMENT
It is normal for the contacts in the headphone jacks to wear out periodically.
To remove the worn jack: press on the small arrow located on the back side of the controller
and slide the jack module in the direction of the arrow.
Note: The headphone jack module can,
in most cases, be replaced without removing the controller from the cardio machine.
To Install
: guide the grooves of the new jack module into the tabs of the controller. Push the
jack module back into the controller until it clicks into place.
