ARESA AR-2301, Инструкция по эксплуатации

Страница: 7 / 16

ENGLISH
OPERATION
CLEANING, TRANSPORTATION AND STORAGE
WARRANTY TERMS
TRANSPORTATION. Transport the device by any kind of enclosed transport observing the rules which ensure preservation of market condition
of both the product and packaging, and its further safe operation.
When purchasing the product, ask for it to be checked in your presence. Without having a warranty card or when it is not properly filled in,
the quality claims are not accepted, and no warranty repair is performed. The warranty card should be presented at any address to the service
center during the whole warranty period. The product is accepted for service in a complete set only. The warranty period is calculated from the
moment of sale to the buyer. Keep the documents confirming the date of purchase of the product (cash receipt).
The condition of free warranty service of your product is its correct operation, which does not go beyond personal domestic needs, in accordance
with the requirements of the operating instructions for the product, the absence of mechanical damages and the consequences of careless
handling of the product.
The product is accepted for warranty service in its pure form. The warranty covers all manufacturing and construction defects (except those
listed in the "Warranty does not apply" section), identified during the warranty period. During this period defective parts, except consumables,
are subject to free replacement in the warranty service center.
THE GUARANTEE DOES NOT COVER:
1. Defects caused by force majeure.
2. Damage to the product caused by the use of the product for purposes that go beyond personal domestic needs (ie industrial or commercial purposes).
3. Consumables and accessories (sections, etc.).
4. Defects caused by overloading, improper operation, penetration of liquids, dust of insects, ingress of foreign objects into the product.
5. Products that have been repaired outside authorized service centers or warranty workshops.
6. Damage resulting from changes in the design of the product by the user or unqualified replacement of his components.
7 . Mechanical damages, including due to negligent handling, improper transportation and storage, falling of the product.
8 . Violation of the operating instructions.
9 . Incorrect installation of mains voltage (if required).
10 . Making technical changes.
11. Damage through the fault of animals (including rodents and insects).
Information on the production date can be found on a separate package.
For warranty service, please contact your nearest service center.
INSTALLATION AND REPLACEMENT OF BATTERIES
Attention!
Danger of explosion! Do not expose batteries to high temperatures, direct sunlight or fire. Do not incinerate battery. The battery contains chemicals,
so it must be disposed in accordance with the related regulations.
To prevent leakage of electrolyte which can cause body injury, damage to the device or property follow the following rules.
• Install 2 AAA batteries in the battery compartment on the steam iron correctly, observing the polarity.
• Remove the batteries if the device is not used for a long time.
Attention! The steamer is designed to work only in an upright position on a dry, flat surface. Before switching on, make sure that the soleplate of the steam iron
is not dirty and the water tank is clean. At fir st switch on some smell can appear, this is normal and soon it will disappear. Make sure that the steamer is
disconnected from the mains. Take the water tank, open the lid and fill it with water. Use distilled water. Do not pour hot water in the water tank. Close the
tank cover and install it on the steamer. Make sure that the water tank is installed correctly. Pull out the cord and connect it to the electrical outlet.
Press "on/off" button on the body of the device. You will hear a beep and the display will show "0".
Press "+" button to set the required power level:
• 1-2 - silk, synthetics • 3-4 - wool, cotton • 5-6 - cotton, linen and other dense fabrics.
In a minute the steamer will be ready for use. Switch on the steamer and adjust the steam supply by using
power button and steam control buttons ("+" / "-")
on the steam iron handle. Make sure that there are 2 AAA 1.5V batteries in the battery compartment on the steam iron. They are necessary for adjusting
the mode of steam supply with a steam iron.
Hold the steam iron vertically. Iron from the bottom upwards. After you finish working install the steam iron on the suspension for steam ironing. After use
empty the water tank and wipe it dry. During operation the steamer will emit sounds.
To iron the shirt, (dresses, etc.), hang the shirt on the hanger and carefully move the steam iron vertically.
Avoid contact of steam iron and steam with open
parts of the body, if necessary use teflon mitten, included in the set. If the product is poorly ironed with steam, you can iron the fabric directly with the steam
iron. To do this put on Teflon mitten, put a cloth on it and iron with a steam iron (make sure that the steam iron does not burn the fabric).
Do not install accessories during the release of steam to avoid burns! Do not use the appliance without water. Avoid bend of the steam hose!
CLEANING. Before cleaning the steamer it is necessary to remove the plug from the outlet and allow it to cool for at least 30 minutes.
To wind the cord press the foot switch. It will run off automatically. Wipe the body with a damp soft cloth and then wipe it dry. Do not use abrasive
detergents or solvents. Remove the water tank and rinse it under running water. Dry it well and install back to the steamer.
Descaling. The mineral sediment inside the pipes and the heater can cause problems witht steamer operation or even breakdown. Depending
on the quality of water in different regions, it is recommended to clean the steamer from scale. Please follow the instructions:
1.Switch off the device and disconnect it from the mains. 2.Disconnect the steam hose. 3. Empty the water tank.
4. Prepare the solution of water and vinegar (50%/50%). 5. Pour the mixture slowly into the hole of hose connectione until the tank is half full.
6. Leave for 40 minutes. 7. Empty the tank from solution by unscrewing the plug.
8. Remove the solution from the hole of hose connection by bending the device over a sink or other container, and pour out the water.
9. Rinse the reservoir and the hose connection with clean water. Repeat this procedure until the vinegar smell disappears.
If the device is working intermittently after these operations then it needs to be repaired.
STORAGE. The device must be stored indoors, in conditions that presume its further safe operation. Make sure that the appliance and all its
accessories are completely dried before storing it. Always store the iron in an upright position.
RECYCLING
The appliance and packing materials must be disposed with the least harm to the environment and in accordance with the rules for waste disposal in your area.