8
ARES™ HIGH-SECURITY STEEL FENCING
Step 4:
Pour Concrete
1.
BEFORE POURING CONCRETE, CONFIRM THE I-BEAM
POSTS ARE SPACED CORRECTLY AND SET AT CORRECT
DEPTH. REFERENCE STEP 1 & 2.
2. Fill post holes with concrete until the concrete is level
with the grade.. As shown in Fig. 7.
3. Use a level to confirm that I-Beams are plumb, positioned
with the desired spacing and aligned with the Guide
Strings. Adjust as needed.
Tip:
• Fortress recommends the utilization of 5000psi concrete,
unless otherwise specified by Architect or Engineer of
recored.
• Allow the concrete to cure for a minimum of 24 hours
before installing Brackets and Panels.
• As the concrete cures, be sure to keep I-Beam Posts placed
along guide strings & continuously check that they are
plumb as well as in line with the next I-Beam Post and set
at the desired spacing.
Fig. 6
Notched flange face on
I-Beam face the inside
of the perimeter
Fig. 4
36” [914mm]
Fig. 5
Ground Stake
& Guide String
I-Beam Post
Содержание Citadel Panel
Страница 1: ...ARES HIGH SECURITY STEEL FENCING 1 ARES HIGH SECURITY STEEL FENCING INSTALLATION INSTRUCTIONS ...
Страница 11: ...ARES HIGH SECURITY STEEL FENCING 11 Fig 10 Fig 9 Fig 8 Fig 11 Fig 14 Fig 13 Fig 12 ...
Страница 13: ...ARES HIGH SECURITY STEEL FENCING 13 Fig 20 Fig 19 Fig 18 Fig 21 Bolt holes on rail bracket aligned ...
Страница 25: ...ARES HIGH SECURITY STEEL FENCING 25 ...
