Ares AZSQ3300, Руководство пользователя

Страница: 10 / 24

10
Charging The Supplied LiPo Battery
Locate the USB style charger and connect it to the LiPo battery. Note the
orientation of the white two-pin connector and align the slots to ensure correct
polarity.
Plug the USB charger into a suitable USB port noting that the LED on the
charger will glow solid red when connected. A discharged battery will be charged
in approximately 70 minutes and can be seen to be fully charged when the red
LED light goes out. When this happens the battery is ready to use and can be
disconnected from the charge lead.
Preparation for Flight
1. Use a Phillips screwdriver to remove the rear battery cover and insert 4 x AA
pencells noting the correct orientation / polarity of each cell. Replace the
battery cover and tighten the screw.
2. Insert the LiPo into the rear of the fuselage and push it home. Connect the
LiPo’s two pin plug to the socket of the quadcopter making sure to align the
slots for correct polarity. Tuck the lead neatly behind the LiPo.