ARDETEM TAI60, Руководство пользователя

Страница: 8 / 21

Page 7
1. INTRODUCTION TO THE µCONSOLE
The µconsole allows displaying the measures of the instrument.
It also allows modifying the configuration. It can be connected either before setting the
instrument on tension or while it is operating.
2. INFORMATION RELATING TO THE INSTRUMENT- FEATURES
The instrument will display its features on the setting on tension (if the µconsole is connected) or after the key
menu (M) is pressed.
Type of the instrument: TAI60
Programme version
Options:
2R 2 relay outputs
3. READING OF THE MEASURES
3.1. Changing of displayed parameter
Press the above keys to switch to the next/previous parameter(s). If 2 measures are being displayed, the unit will
appear on the side of the parameter name. Otherwise, it will appear under the value.
The measures are displayed on 4 digits, the energies on 6.
4. ACCESS TO THE MAIN MENU
In the menus, the key (M) is used as a « back » key.
The key menu allows entering the configuration.
The instrument will show its features, and then open access to the main menu (in reading only).
Access / exit of the configuration menu:
- Configuration in readin / writing (code 111)
- Revert to the previous menu or revert to the measure
To modify the configuration enter the code 111:
« PROGRAM »

« CODE »

« 111 »
Exit and save by pressing M until the display shows
« SAVE » and validate « YES »
Increase / navigation
following measure
Decrease / navigation
previous measure
Validation
Switching to the next character for an entering