ARDETEM TAI60, Руководство пользователя

Страница: 4 / 21

Page 3
1. RECEIPT OF THE INSTRUMENT & START UP

Check that the configuration of the instrument (as indicated on the case bottom label) corresponds to your order.

Mount the instrument on a DIN rail.

Connect the power supply (see the wiring diagrams). The tension LED lights up.

The instrument now starts to measure, it has a standard configuration (except specific indications on your order).

The instrument can now be programmed, preferably before connecting the measure signals.

Now connect all the signals: see the wiring diagrams.

If not specified, the communication parameters for the PC software or the digital output are the following:
slave number = 250 speed = 9600 bauds without parity 1 stop bit
2. ORGANISATION OF THE FRONT FACE
IN CASE OF PROBLEM …

If the instrument does not light up: Check the presence of power supply (even for a self-powered instrument).

If the instrument does not measure: Check the presence of the measure signals.
Check the programming.

If the green LED is blinking: The instrument is detecting an error, connect the console or the PC software for
the analysis.
DIN rail
ON: Visualisation of the setting on tension /
error
COM: Visualisation of the communications
REL: Visualisation of the relays status
Connectics for the programming
micro-console / shifted display.
DIN plug: PC connection
D
O
N
O
T
D
IS
M
O
U
N
T
T
H
E
F
R
O
N
T
F
A
C
E
IF
T
H
E
M
E
A
S
U
R
E
S
IG
N
A
L
S
A
N
D
T
H
E
P
O
W
E
R
S
U
P
P
L
Y
A
R
E
C
O
N
N
E
C
T
E
D