ARDETEM TAI60, Руководство пользователя

Страница: 6 / 21

Page 5
6. USE OF THE « CUT OFF »
The « cut off » is a programming option of the instrument which allows setting the display to 0 separately for low U
and I values (see the chapter « programming of the
CUT OFF
»).
Once the menu is validated the instrument will measure the values on its inputs and enforce the display to 0 for any
values lower than the « cut off » programmed in % of the caliber (1 or 5A, 100V
L-N
/ 175V
L-L
or 330V
L-N
/ 600V
L-L
).
7. LIST OF THE ERRORS
When the green LED on the front face is blinking, the instrument is indicating an error.
The number of the error can be seen connecting the micro-console or the PC software.
Err nr Types of errors Notes
0 Programme memory deleted Contact after sales
2 Wiring error Wrong wiring of the U / I measure signals
4 Current caliber overstepping CC’s not adapted
8
Voltage caliber overstepping VT’s not adapted – wiring error – error in the
programming of the network type
32
Configuration lost Re-programme the instrument
64 Calibration lost Return to the factory for re-calibration