And choice of the decimal point by
Validate this choice by
And choice of the unit by
Validate this choice by key
Further functions can be accessed by pressing several keys
simultaneously :
Automatic setting of the voltage cut off;
(see p17)
Automatic setting of the current cut off;
(see p17)
Visualisation of the measure unit;
(see p17)
Visualisation and setting of the alarm setpoints;
(see p18)
Display of the lower part of an energy counter
(see p17)
Modification of the display resolution
(see p18)
Recording of the current display as the display which
will appear on setting on tension.
Reading convention :
Move through the main menu
Revert to previous menu
Blinking display : awaiting validation or setting
Alternate information display
Entering of a parameter :
First start by increasing or decreasing
the 1st digit and the sign : from -9 to +9.
The 2 nd from 0 to 9.
The 3 rd from 0 to 9.
The 4 th from 0 to 9.
p5
4. PROGRAMMING
4.1 Communication with the instrument
Several functions can be accessed from the measuring
:
4.3 Main menu
4.2 Orientation through the programming
Dialogue is ensured by 4 keys located on the front face.
Move through
the menus :
downwards, or
decrease the
value shown
Validation of
the displayed
parameter, or
access to a
sub-menu
Note :
In mode programming, the instrument will automatically revert
to measure with the previous configuration, if no key is pressed during
1min.
Move through the
menus : to the
top, or increase
the value shown
Alarms
Led 1
Led 2
Led 3
Led 4
Functions
Indication display 1
Indication display 2
Indication display 3
Indication generator / receiver
Display of the min. value
(p17)
or switching to next
display parameter
(long pressing > 3s)
Display of the max.
value
(p17)
or revert to
previous display parame-
ter (long pressing > 3s)
Min. and
max. zero
reset
p17
Access to
main menu
p5
If code correct,
access to the
programming menu
(see p6)
Simulation
of the ana-
log output
(see p16)
Authorized by
access code
Deleting of
recorded
alarms
(see p16)
Measure
display
M
+
M
+
M
+
M
+
+
+
6
888
6
5
88
65
2
8
652
0
rEAd
ProG
CodE
8 888
GEnE.
CLEAr
«
«
«
«
«
«
Programming
of the access
code
(see p16)
Simulation of
the display
(see p16)
Authorized by
access code
(relay output /
analog)
(analog
output)
(relay output)
P.CodE
SIMUL
«
«
zero reset of
the energies
(see p16)
Authorized by
access code
CLr.E
«
menu
scroll
vertical
move
Entering of the access code.
The access to the programming
menu is protected by a 4 cipher
code.
The code is 0000 on factory exit
(to change this code,
see p16
).
Between each entering, validate
the cipher with key
Mode reading
of the
configuration
(see p15)
6
.
520
1
10 3
10 6
10 9
and
and
Stick the
unit labels
on the
Leds
+
Exit from a sub-
menu to access
next menu /
access to the
programming
exit menu
M
M
