p10
Pr.diS
«
On
«
OFF
«
YES
«
no
1 1 1 1
«
br.bAr
1 1 1 1
«
L.dIG
«
nuLL
SAvE
Adjusting of the display brightness
on 4 levels
On 4 levels
Brightness of the bargraph and leds
Not enfor. to 0
Deleting of the unsignificant zeros
State of the last digit (right hand side)
Enforced to 0
See also the display features
p15
«
br.diG
Pr.diS
4.4.7 Programming of the brightness,
the bargraph and the displays
Option bargraph
«
0600
«
d.bAr1
«
0200
«
F.bAr1
Value of the display parameter 1 corresponding
to 0% of the bargraph (dec. point + unit)
Value of the display parameter 1 corresponding
to 100% of the bargraph (dec. point + unit)
Value of the display parameter 2 corresponding
to 0% of the bargraph (dec. point + unit)
Value of the display parameter 2 corresponding
to 100% of the bargraph (dec. point + unit)
Value of the display parameter 3 corresponding
to 0% of the bargraph (dec. point + unit)
Value of the display parameter 3 corresponding
to 100% of the bargraph (dec. point + unit)
«
0600
«
d.bAr2
«
0200
«
F.bAr2
«
0600
«
d.bAr3
«
0200
«
F.bAr3
4.5.3 Choice of the current caliber
or only in manual
Features of the current input
Caliber
Display resolution
Input level
resolution
Accuracy
0 to 1 A In=1.2A
± 1 digit
10 bits
0.2% of In
0 to 5 A In=6A
± 1 digit
10 bits
0.2% of In
4.5.2 Manual or automatic caliber
Automatic caliber
Manual caliber
4.5.1 Choice of the network
Single phase network
3-phase balanced network, 3 wire, without neutral
3-phase balanced network, 4 wire, with neutral
SAvE
rES.
1F
t3FE
CAL
Auto
CALI
1A
5A
MAnu
t4FE
SAvE
no
YES
Exit with
configuration
saving
Exit without
configuration
saving
Revert to
measure
display
4.5 Input features and programming limits
Note : An exit from mode programming with saving of the configuration
(
SAVE, YES
) will automatically reset to zero the min. and max., as well as the
recording of alarms.
4.4.9 Programming exit with or without
saving
