Arctic Spas Arctic Fox, Руководство пользователя

Страница: 34 / 124

Please note: You will see the options that are applicable to your spa. If you have neither ozone nor onzen, you will
proceed directly into setting your Filter Duration. Also, though an Epic topside is of a different design, the steps are as
shown. You can move backwards through the settings by pressing the Pump 3 button (Pump 4 on Epic series spas).
The Pump 1 button will allow you to exit without saving any changes. When you get to the end of the options, press the
filter key one last time to save changes and begin a filter cycle immediately. If you do not press the filter key again your
changes will be saved and the filter cycle will begin when you have programmed it to do so.
During a filter cycle
- Pump 2, Pump 3 and the blower run for 20 seconds, then
- Pump 1 runs at low speed for the programmed number of hours (see below), and
- The ozonator is turned on.
45 Minute filter cycle time-out: If you turn a pump, blower or light on during a filter cycle, the cycle will be
interrupted and will only resume 45 minutes after you ( or the system ) have turned the last active output off.
ER01 – Insufficient water flow through pump 1 ER03 - Pump 1 is not working on high speed
ER02 - Pump 1 is not drawing amperage on low speed ER04 – Pump 1 is Air Locked
Error Codes
Programming the Filtration Settings
Press your Filter but-
ton again. Your dis-
play will now show
the settings for your
Filter Duration.
Use your arrow keys
to select your Filter
Duration in hours.
You can select from 0
to 6 hours.
Press your Filter but-
ton again. Your dis-
play will now show the
settings for your Filter
Cycle Frequency.
Use your arrow keys
to select your Filter
Cycle Frequency from
1 to 4 times per day.
Press the Filter but-
ton to enter into your
filtration options. Your
display will show
“Sett” and from here
you will be able to
choose your settings.
Press your Filter but-
ton again to display
your first option. This
is your Ozone Cycle
Duration
(if equipped)
.
Use your arrow keys
to select your Ozone
Cycle Duration. You
can select from 1 to
24 hours per day.
Press your Filter but-
ton again. Your dis-
play will now show
the settings for your
Onzen
(if equipped)
.
Use your arrow keys
to select your Onzen
Cycle Duration. You
can select from 1 to
24 hours per day.
Filter button
Arrow keys
Owners Manual - Custom Series
34 34