Arctic Cat 2013 Prowler XT, Руководство по обслуживанию

Страница: 17 / 233

2-6
ATV0052E
When installing a spark plug, be sure to tighten it
securely. A new spark plug should be tightened 1/2 turn
once the washer contacts the cylinder head. A used spark
plug should be tightened 1/8-1/4 turn once the washer
contacts the cylinder head.
Muffler/Spark Arrester
Clean the spark arrester using the following procedure.
1. Remove the cap screws securing the spark arrester
screen assembly to the muffler; then loosen and
remove the spark arrester. Account for a gasket.
PR837
2. Using a suitable brush, clean the carbon deposits
from the screen taking care not to damage the screen.

NOTE: If the screen or gasket is damaged in any
way, it must be replaced.
3. Install the spark arrester assembly and gasket and
secure with the cap screws. Tighten the cap screws to
48 in.-lb.
Engine/Transmission Oil -
Filter
OIL - FILTER
Change the engine oil and oil filter at the scheduled inter-
vals. The engine should always be warm when the oil is
changed so the oil will drain easily and completely.

NOTE: To change oil and filter, the seats and center
console must be removed.
1. Park the vehicle on level ground.
2. Remove the oil level stick/filler plug.
PR053B
GZ415A
3. Remove the drain plug from the bottom of the engine
and drain the oil into a drain pan.
PR078A
! WARNING
Wait until the muffler cools to avoid burns.