21
ATV2205
4. Adjust toe-in to 15 mm (0.60 in.); then measure dis-
tances (C) and (D). Distances (C) and (D) should be
equal.
5. After all the adjustments are to specifications,
tighten the tie-rod lock nuts to 22 ft-lb.
NOTE: Prior to locking the jam nuts, make sure the
ball joints are at the center of their normal range of
motion and at the correct angle.
NOTE: The front wheels do not have to be removed
to adjust the tie rod. Also, care should be taken not to
disturb the handlebar position.
Front Brake Lever
REMOVING
1. Remove the right handlebar grip.
2. Remove the cover from the throttle control housing
exposing the throttle cable; then remove the cable.
MD2440
MD2439
3. Remove the front brake cables from their adjusters
by screwing the adjusters inward to loosen the
cables; then pulling them free.
MD2449
4. Loosen the screw securing the front brake lever
assembly and slide the assembly off the handlebar.
MD2450
INSTALLING
1. Slide the right brake lever assembly onto the handle-
bar; do not tighten the screw completely at this time.
! WARNING
After removing and installing of components that are
brake-related, ALWAYS check and adjust brakes as nec-
essary before operating the ATV.
