4 Controls
30
"M" button (Mode)
(3) – Using the "M" button, you can toggle between the following
display modes:
– Speedometer / gauge
– Distance
– Time of day
Toggling between the display modes:
1. Press and release "M" button repeatedly until the desired mode is displayed.
Around 2 seconds after releasing the "M" button, the digital display will return to
the full-screen display.
"S" button (Setting/resetting button)
(4) – Using the "S" button, and in combination
with the "M" button, various displays of the digital instruments can be set and reset.
Level indicator
(5) – Displays the approximate fill level of the fuel tank.
Low oil pressure indicator
(6) – This icon is only displayed during the self test while
starting. The oil pressure is not displayed in normal operation (because it is not meas-
ured in these vehicles).
Odometer (ODO) / trip meter (TRIP)
(7) - The odometer displays the total number of
kilometres driven with this vehicle and cannot be reset. In contrast, the trip meter is
used to measure distances or legs and can be reset.
Toggling between odometer (ODO) and trip meter (TRIP) display:
1. Press "M" button (3) to select the "Distance" mode.
2. Press "S" button (4) to select the desired ODO or TRIP display.
3. To reset the trip meter: keep "S" button (4) pressed.
Gear indicator
(8) – Displays the gear engaged:
– R (Reverse gear)
– N (Neutral position)
– L (Low speed gear)
– H (High speed gear)
– P (Park position, if available)
NOTE
If the bottom segment of the level indicator is flashing, there will still be 3.5 l
(0.92 U.S. gal.) of fuel in the tank.
