4 Controls
18
4
Controls
4.1
Ignition switch
4.1.1
Ignition switch (not XR)
The ignition switch has three switch posi-
tions:
– OFF (3): All electrical circuits except for
the accessory connection are switched
off. The engine cannot be started. You
can remove the ignition key in this
switch position.
– ON (1): The ignition circuit is closed,
the position lights are switched on, and
you can start the engine. You cannot
remove the ignition key in this switch
position. Low beam and high beam are
switched off.
Fig. 7
– LIGHT (2): The ignition circuit is closed, the position lights and low beam or high
beam are switched on. You cannot remove the ignition key in this switch position.
If the error code P0635 continues to flash afterwards, contact an Arctic Cat specialist
repair shop authorised by Arctic Cat.
NOTE
In the case of vehicles delivered from the 01/01/2016, the functions of switch
position LIGHT (2) and switch position ON (1) are identical.
NOTE
The accessory connection is supplied by the battery in any switch position.
NOTE
If the engine is not started within 5 minutes after switching on the ignition,
the error code P0635 will appear and flash on the gauge display. In this case,
turn ignition key into position OFF and into position ON again to be able to
start the engine.
