2-11
2
AL681
2. Compress the brake lever/pedal several times to
check for a firm brake. If the brake is not firm, the
system must be bled.
3. To bleed the main brake system, use the following
procedure.
A. Remove the cover and fill the reservoir with DOT
4 Brake Fluid; then install and secure the cover.
B. Slowly compress the brake lever several times.
C. Remove the protective cap, install one end of a
clear hose onto one FRONT bleeder screw, and
direct the other end into a container; then while
holding slight pressure on the brake lever, open
the bleeder screw and watch for air bubbles. Close
the bleeder screw before releasing the brake lever.
Repeat this procedure until no air bubbles are
present.
AF637D
PR377C
NOTE: During the bleeding procedure, watch the
sight glass very closely to make sure there is always
a sufficient amount of brake fluid. If low, refill the res-
ervoir before the bleeding procedure is continued.
Failure to maintain a sufficient amount of fluid in the
reservoir will result in air in the system.
D. At this point, perform step B and C on the other
FRONT bleeder screw; then move to the REAR
bleeder screw and follow the same procedure.
E. Repeat step D until the brake lever is firm.
4. To bleed the auxiliary brake system, use the follow-
ing procedure.
A. Remove the cover and fill the reservoir with DOT
4 Brake Fluid; then install and secure the cover.
B. Slowly compress the brake pedal several times.
C. Remove the protective cap, install one end of a
clear hose onto the rear bleeder screw, and direct
the other end into a container; then while holding
slight pressure on the brake pedal, open the
bleeder screw and watch for air bubbles. Close the
bleeder screw before releasing the brake pedal.
Repeat this procedure until no air bubbles are
present.
AF637D
PR377C
NOTE: During the bleeding procedure, watch the
reservoir very closely to make sure there is always a
sufficient amount of brake fluid. If low, refill the reser-
voir before the bleeding procedure is continued. Fail-
ure to maintain a sufficient amount of fluid in the
reservoir will result in air in the system.
D. Repeat step B and C until the brake pedal is firm.
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com