Signal
Description
Time base
IL2
Phase current IL2
5ms
IL3
Phase current IL3
5ms
General settings
The general settings define the basic control settings for the voltage measurement configuration. The
settings give general information about the AV regulator's condition and status. The general settings
also include indications and measurements.
Table. 5.4.4 - 173. General setting parameters.
Name
Range
Step
Default
Description
Voltage measurement
0: U12
1: U23
2: U31
3: U4 input
-
0: U12
Selects the measured system voltage from the UL12,
UL23, UL31 and U4 inputs.
U4 measures
0: U12
1: U23
2: U31
-
0: U12
Selects the measured system voltage connected to the
U4 input.
This setting is only visible if the "U4 input" option has
been selected in the "Voltage measurement" parameter.
Vreg settings condition
1: U>> set too low
2: U< set too high
3: U> set higher
than U>>
4: U< set lower
than U<<
5: U>>> set too
low
6: U<<< set too
high
7: VT selection not
ok
-
0
When opened displays the internal information about the
settings. If the value differs from 0, the settings are not
correct.
Vreg condition
1: Raise command
on
2: Lower
command on
3: Operation
blocked
4: Output control
blocked
5: U<<< block on
6: I> block on
7: Tap on highlimit
8: Tap on lowlimit
9: Operation
blocked
10: U>/< pick-up
on
11: U>>/<< pick-
up on
12: Control wait
time on
13: Manual control
mode on
-
0
When opened displays the internal information about the
automatic voltage regulator's current status. When the
value is 0, nothing is happening.
A
AQ
Q-T215
-T215
Instruction manual
Version: 2.04
279
Содержание AQ-T215
