Arcon IRONHORSE 300S, Руководство по эксплуатации

Страница: 4 / 25

4
General Information
Warranty
The warranty of The Ironhorse welders covers any defect in materials or workmanship. The
warranty period is
five
years for parts and labor
(US only)
from the date of purchase. The
warranty period for rental units begins with the first rental or 45 days from the date of shipment to
the rental company, whichever is earlier.
Introduction to The Ironhorse 300S 700V DC
The Ironhorse 300 700V DC is a portable welder using an inverter type power supply to
generate the output power.
The Ironhorse 300 700V DC is primarily designed for stick welding (SMAW). It can also be used
for TIG (GTAW) welding, using the Lift Start principle, as well as arc gouging and stud welding.
Use Range I when stickwelding, when possible. The first range produces a softer arc than that
of Range 2. (See Paragraph 3.1.3)
The Ironhorse operates on DC input voltage 500V to 800V DC. The DC input voltage is
connected to a circuit breaker. The output side of the breaker is connected to a diode, which
protects the welder from being connected to the wrong polarity.The DC voltage is converted to
AC by a DC to AC 60 HZ inverter. The 480V AC is connected to an auxiliary transformer which
transforms the voltage to 48V AC for the fan motor and the control board.