arcelik Beko B13, Руководство по обслуживанию

Страница: 9 / 111

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
9
4. Product Installation / Installation Rules / Settings
Apply to the nearest Authorized Service agent for the installation of your product. In
order to make your machine ready for use, before calling the authorized service,
make sure that electrical installation, clean water installation and water drain are
appropriate by checking the user manual. If this is not the case, call for a qualified
electrician and technician and take necessary actions.
Customer is liable to prepare the place of installation for the product,
electricity, clean water and waste water installations.
Installation and electrical connections of the product should be performed
by Authorized Service. Manufacturer cannot be held responsible for any
damages which might arise due to the operations performed by
unauthorized persons.
WARNING: Before use, check whether there is any damage on the
product. If the product is damaged, do not have it installed. Damaged
products pose a risk for your safety.
Make sure that the water inlet and drain hoses and the power cord of the
machine are not folded, pinched or broken during when the product is
pushed into its place after the installation or cleaning works.
4.1. Correct Place for Installation

Place the product on a hard floor. Do not put it onto a carpet with high pile or
other similar surfaces.

When the washing machine and drier are placed on top of each other, their total
weight
–when loaded– amounts to 180 kilograms. Place the product onto a sound
and flat surface having an adequate load bearing capacity!

Do not place the product on the power cable.

Do not install the product in the environments where the temperature falls below 0
ºC.

Leave a minimum space of 1 cm between the machine and the furniture.