arcelik Beko B13, Руководство по обслуживанию

Страница: 31 / 111

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
31
In addition to the method above, to deactivate the Child Lock,
switch the Programme Selection knob to On / Off position when no
programme is running, and select another programme.
Child Lock is not deactivated after power failures or when the
machine is unplugged.
5.12. Progress of the Program
Progress of a running programme can be followed from the Programme Follow-up
indicator. At the beginning of every programme step, the relevant indicator light will
turn on and light of the completed step will turn off.
You can change the auxiliary functions, speed and temperature settings without
stopping the programme flow while the programme is running. To do this, the change
you are going to make must be in a step after the running programme step. If the
change is not compatible, relevant lights will flash for 3 times.
If the machine does not pass to the spinning step, Rinse Hold function
might be active or the automatic unbalanced load detection system might
be activated due to the unbalanced distribution of the laundry in the achine.
5.13. Lock of the loading door
There is a locking system on the loading door of the machine that prevents opening
of the door in cases when the water level is unsuitable.
Loading door light will start flashing when the machine is switched to Pause mode.
Machine checks the level of the water inside. If the level is suitable, Loading Door
light illuminates steadily within 1-2 minutes and the loading door can be opened.
If the level is unsuitable, Loading Door light turns off and the loading door cannot be
opened. If you are obliged to open the loading door while the Loading Door light is
off, you must cancel the current programme. See "Cancelling a Program".
5.14. Changing the selections after the program started
Switching the machine to pause mode
Press the Start / Pause button to switch the machine to pause mode while a
programme is running. The light of the step which the machine is in starts flashing in
the Programme Follow-up indicator to show that the machine has been switched to
the pause mode.
Also, when the loading door is ready to be opened, Loading Door light will also
illuminate continuously in addition to the programme step light.
Changing the auxiliary function, speed and temperature
Depending on the step the programme has reached, you can cancel or activate the
auxiliary functions. See "Auxiliary function selection".
Moreover, you can a
lso change the speed and temperature settings. See “Speed
Selection” and “Temperature Selection”
If no change is allowed, the relevant light will flash for 3 times.
Addition or removal of laundry