arcelik Beko B13, Руководство по обслуживанию

Страница: 11 / 111

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
11
Figure 4.4
Keep the transportation safety bolts in a safe place to reuse when the
washing machine needs to be moved again in the future.
Never transport the machine unless its transport safety bolts are installed!
4.4. Connection to the Supply Water
Required water pressure is between 1-10 bar (0.1-1 MPa) for the proper
operation of the machine. For the healthy operation of the machine, 10
– 80
liters of water per minute should be supplied from a fully opened tap. If the
water pressure is higher, attach a pressure decrease valve.
If you will use the double water inlet product as a single water inlet (cold) ,
before operating the product, make sure you insert the plug supplied with
the product to the hot water inlet. (It applies to the products with which blind
plug group is supplied.)
WARNING: Single water inlet models should not be be connected to the hot
water tap. Laundry may be damaged or product may not operate according
to the protection status.
WARNING: Do not use the old or used water inlet hoses for the new
product. It may leave stains on your laundry.
Figure 4.5
3. Attach the plastic covers
supplied in the User Manual
bag into the holes on the
rear panel. (P)
1. Connect the special hoses
supplied with the product to
the water inlets on the
product. Hose with red
inscriptions (left) (Max. 90
ºC) is for hot water inlet,
hose with blue inscriptions
(right) (Max. 25 ºC) is for
cold water inlet.