ARCA 824 series, Руководство по эксплуатации

Страница: 31 / 46

ARCA Regler GmbH 10 Pneumatic connection
Series 824 31 / 46 09.2018 / 1.0
10 Pneumatic connection
The assignment of the pneumatic connections is done in accordance
with the designation of the connection sign affixed to the side or affixed
inside the cover (51). Commercially available screw connections for cop-
per and stainless steel pipe or plastic hoses can be used.
In the case of versions with manometer block, the connections are loc-
ated on the manometer block.
▪ With all electro-pneumatic versions the input E
26
is to be sealed with
the blanking plug (64).
▪ In the case of integrated positioner mounting (refer also to the
chapters [9.2.2] Integrated mounting on actuators series 812 , [9.2.3]
Integrated mounting on actuators series 813 and [9.3.3] Integrated
mounting on actuators series 840 ) the output A
36
is to be sealed with
a plug. The blanking plug (53) on the rear side of the positioner (illus-
tration: Rear side) is to be unscrewed and removed.
Rear side single-acting double-acting
Illustration 16: Pneumatic connection