4.2.2
Reading Clock Configuration
When first starting the 1095 Utility there will be two functions open:
Open and Read. Read allows you to poll the connected Model 1095A/C
and download all of the configuration information. You can find “Read"
by either by selecting Unit
>
Read, or by clicking the Read icon.
When selecting the Read function by either method, the 1095 Utility
will immediately try to read the connected clock. If it is successful, it
will show a progress bar for a few seconds and then populate all of the
values in the 1095 Utility windows. See Figure 4.7.
Figure 4.7: Reading the Configuration
If for some reason you get a message that the 1095 Utility could not
read the clock, make sure to verify the following:
1. Configure the correct COM port on your pc (1095 Utility).
2. Configure the correct baud rate, or other settings (1095 Utility).
3. Connect the correct cable(s) between the Model 1095A/C and pc.
4. Set DIP switch SW8 to ON (see Table 2.1).
29
