8.8
Position Data Commands
8.8.1
Return Elevation
Command:
LH
LH returns the current antenna elevation.
Response:
nnnnn.nnC
Format: Where: Elevation in meters referenced to the WGS-84 datum;
n = -1000.00 to +18000.00 meters.
8.8.2
Return Latitude
Command:
LA
LA returns the current antenna latitude.
Response:
Ndd:mm:ss.sssC
Format: N = North (S for South), dd = degrees, mm = minutes,
ss.sss = seconds
8.8.3
Return Longitude
Command:
LO
LO returns the current antenna longitude.
Response:
Wddd:mm:ss.sssC
Format: W = West (E for East), ddd = degrees, mm = minutes,
ss.sss = seconds
8.8.4
Set Receiver Position
Command:
d,m,s,D,M,S,hSP
d,m,s,D,M,S,hSP sets the receiver position based on the following
values: negative values are South latitude and West longitude, positive
values are North latitude and East longitude.
d = degrees latitude, m = minutes latitude, s = seconds of latitude,
D = degrees of longitude, M = minutes of longitude, S = seconds of
longitude, h = height (
±
meters)
Response:
C
89
