ARANA KAC 25, Инструкция по установке и эксплуатации

Страница: 45 / 60

Make A Difference 卓 / 尔 / 不 / 凡
EN
45
5.4 Installing discharge duct and mounting bracket
This completes the outside work. Minor adjustments can be done from the inside of
the vehicle if required.
Taking out air distribution box and mounting hardware from carton.
Taking out the upper air duct and locate it over blower discharge. See FIG.08.
Use 4 screws (M4 x 8mm) to hold duct to base pan. Holes are provided at bottom
of base pan for these screws to go into.
Check for correct alignment and adjust the roof air conditioner as necessary (EVA
gasket centers over 362*362mm square opening).
Check the thickness of the vehicle roof, the air conduct is made of EPP material,
connecting the upper and lower parts which is suitable for maximum140mm roof
thickness. You can cut it as needed.
Reach up into return air opening and pull the unit electrical cord down for later
connection. See FIG.09.
08
NOTE!
BLOWER
DISCHARGE
UPPER AIR DUCT
SCREWS
a.
b.