23
15.5
Semi-automatic mode
Once the BLC function is in AUTO mode, the boom height and tilt control can be manually managed by the control panel, independently of each other.
Fig. 37
• If the operator keeps the switch
controlling
boom height
pressed
for approximately 2 seconds, this
movement (ONLY) becomes MANUAL.
Fig. 38
• If the operator presses the switch
controlling
leveling
, this movement
(ONLY) becomes MANUAL.
Fig. 39
• If the operator presses
both
switches
(one after the other), the SYSTEM shifts
to MANUAL mode.
The MANUAL movement is active
until a new automatic enabling is
provided.
15.6
Manual control
M
In this mode, the BLC control
DOES NOT PERFORM ANY ADJUSTMENT.
The hydraulic valves are activated by the operator with the connected control panel, VT or Joystick.
USE
OR
OR
OR
+
