10
INSTALLATION
9
REQUEST OF THE BLC FUNCTION ACTIVATION CODE
9.1
Menu > System status > Registration license
To activate the BLC function on the control unit, AN ACTIVATION CODE IS REQUIRED.
Ask the code to ARAG, by providing the following information:
- purchase identification code received with the kit.
- hydraulic control unit serial number ("SERIAL NO." label on control unit rear side) that can be viewed also from the Device status menu
of the monitor in the example:
Menu > System status
9.1.1
Activation procedure
2
1
Fig. 12
1
Enter the supplied code and confirm.
The IBX100 will restart.
- Once finished, the activated function will be displayed by the system.
- Now the control unit is active: monitor shows all the menus for BLC control setup
and use
2
Active functions.
WARNING
AFTER CONTROL UNIT ACTIVATION, PROGRAM THE NECESSARY PARAMETERS (par. 10.2 and 10.3, shown in Fig. 15).
