ARAG 46742DX1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 85 / 96

85
14 maintenance / diagnoSticS / RepaiRS
14.1 Alarm display
When one alarm is triggered, Bravo 400 displays the error in the active screen (par. 12.5 - Display).
The display changes according to the active screen:
full diSplay only Symbol no diSplay
Fig. 290 Fig. 291 Fig. 292
• Error messages full display (Fig. 290)
Bravo 400 displays a yellow bar with the description, as in the example of Fig. 290.
This display appears in all screens (par. 12.5), except those regarding: Full screen camera (Fig. 292), Job data (Fig. 291) and any programming menu.
• Only symbol (Fig. 291)
Bravo 400 EXCLUSIVELY displays the yellow triangle WITHOUT description as shown in Fig. 291.
This display appear ONLY in
Job data
(Fig. 291) and programming menu screens (sect. 10 and 11).
To consult the error message press SHIFT several times until selecting a full display screen.
• No display (Fig. 292)
This case applies ONLY to the
Camera / Full screen
page (Fig. 292).
During the alarm an acoustic intermittent signal will be emitted. Press ESC to temporarily disable the acoustic signal (1 minute).
To consult the error message press
SHIFT
several times until selecting a full display screen.
14.2 Pump failure alarm
Fig. 293
The message
Stop machine! Pump failure
concerns a particularly serious fault in the system.
For this reason it is always shown in the centre of the display (Fig. 293).
Should you need to continue the job press
ESC
to close the error windows.
The alarm will remain active with the display modes explained under par. 14.1.
Stop the machine and check the pump as soon as possible.
MAINTENANCE / DIAGNOSTICS / REPAIRS