ARAG 46742DX1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 66 / 96

66
13.1.2
F1 Job type
ONLY FOR
Select the type of treatment to perform among those pre-set in the
Treatment settings
menu (par. 11.2),
or temporarily change the treatment underway.
1 Press
F1
. The display will show the features of treatment underway (Fig. 227).
In this screen it is possible to change the treatment values (Fig. 228 - 229), or select a pre-set one (Fig. 230).
2
Press
F4
or
F6
to select the item to change.
3
Confirm selection.
Fig. 226 Fig. 227
SpRay Rate change noZZle change
Fig. 228
4 Change the value (
+
increase,
-
decrease).
5
Confirm datum.
Fig. 229
4 Select nozzle
A
(option disables the nozzle)
5
Confirm selection.
6
Repeat the operation for nozzle
B
.
Above changes are only TEMPORARY and are not stored among the pre-set treatments.
Selecting one pRe-Set tReatment
Fig. 230
1
Select the treatment to use.
2
Confirm selection.
WORK FUNCTIONS - PAGE 1