63
USE
12.9
Spraying a field
Fig. 217
Let's consider to wish to spray field by parallel lines, but only after spraying field borders.
• Switch Bravo 400 on (par 9.2).
After self-diagnosis routine, system asks if you wish to continue a previous job (Fig. 217).
Press
ESC
to start a new spraying job.
• Select driving mode you wish to use during spraying job: execute function
(par. 13.1.4).
• Select or set the spraying to perform with the suitable function
(par. 13.1.1 - 13.1.2).
• Set the tank level with the suitable function
(par. 13.1.9).
• Set at the beginning of field to spray (Fig. 218).
• Operate the switch for the main control valve to start spraying.
• Start driving along field border. During this path, message
Mark A?
is displayed
Fig. 218
maRking pointS a and b
• While driving field border you will mark two points A and B
(as described under par. 13.2.2 - function
).
This operation is essential for Bravo 400 to guide you,
during spraying, on tracks parallel to the reference one obtained marking
points A and B.
We recommend that you mark A and B at the ends of a straight
length as long as possible and while vehicle is moving: the
longer the marked length across points A and B, the lower the
error caused by your deviation while driving.
Fig. 219
• Once straight line A/B (
t0
) is tracked, the whole field could be sprayed
along tracks parallel to it (Fig. 219), following the reference tracks that will
be displayed (Fig. 220).
Fig. 220
Содержание 46742DX1
Страница 6: ...Notes 6...
Страница 94: ...Notes 94...
