
Installation instructions
8.
Diagram of device connection and operation
9.
Use of the lock pin and connecting the hoses
Pull the locking pin (2) off the connector (1). Insert the hose (3) into the connector. It sinks to a depth of about
15 mm. Pull the hose out slightly and replace the locking pin (2). Pull to make sure that the hose (3) remains
closed: do not pull more than 8 kgF. You can change the length of the hoses by cutting them to the length
desired with a sharp carpet knife. Cutting should be done against a flat surface and in a direct line.
Detaching the hose or plug (4),
Hose removal key (4) not included in the delivery, you
Attaching the hose of plug
may use a small screwdriver or press with fingertips.
Hot water line
Saddle connector
Mineralization
Activated carbon
Osmotic membrane
Pre-filters
Pressurized water tank
Cold water line