NOTE
07
Initial operation
The water may initially come out discolored (light to charcoal gray) due to carbon
particulates in the new filter.
This is not harmful and is typical of all carbon filters. Allow the water to flow
for 2-3 minutes in the "Filtered" mode to flush all the carbon dust.
Power up your ionizer.
Turn on power switch on back side
after plugging power code into socket.
1
2
Start water flow through your ionizer.
- Press the
"POWER"
button which opens the internal valve in your ionizer.
- The Digital Filter Life Indicator will begin and you will hear your ionizer's "voice"
announcing the selected mode of operation.
How to use
OFF
ON
Signal sounds, initial screen appears and disappear
again which makes it stand-by status.
Alkaline2
pH
Filter
Flow
Running Time
9 .0
3888
1.6
00:00:14
er
r
3
38
38
8
88
88
k
te
