14
Once new filter is installed, rotate the filter until the arrow on
the filter is aligned with the arrow on the machine.
Your filter is equipped with a genuine chip. This chip communicates with
the machine how much water has flowed through the filter.
Make sure the arrow on
filter lines up with the
arrow on the machine!
Flush out the carbon dust.
Replace the filter cover.
The water flowing through will initially come out discolored
(light to charcoal gray) due to carbon particulates in the new
filter. It is not harmful.
Allow the water to flow for 2-3 minutes in the filtered mode
and this will flush all the carbon dust.
Insert the new filter into the compartment.
Remove the plastic caps covering both ends of the new filter.
Seat the large opening on the bottom of the filter cartridge
onto the base in the center of the filter cushion.
Push the filter down and into the housing
compartment ensuring the opening at the top
of the filter is seated properly into the fitting at
the top of the housing.
★
4
5
6
Please replace filter when any one of the flowing occur:
- When severely polluted water has been run through the ionizer and filter
- Excessive odor in output water and/or severely decreased flow rate
- After prolonged period of inactivity of over 30 days
