27
Accessories
(Needed for faucet installation)
How to install the faucet
All the fittings are push in style fittings. To attach the hoses to any fitting, firmly insert the end of
the hose into the fitting. Pull firmly to check to connection - you should not be able to pull the
hose out. To release the hose from the fitting, you must push the spring loaded ring protruding
from the end of the fitting while pulling the hose out.
Use appropriate tools to make 1.14in.
diameter hole in the location where you will setup the faucet.
Make sure the faucet location will allow both spouts to reach the sink.
Center the faucet in the hole properly over the gasket.
After the faucet is fixed, connect it to fitting with 5/16 in hose(for Alkaline) like
Check the hose whether it is inserted properly or not. Also, connect it with 1/4”
hose(for Acidic) like figure4 and connect the faucet to the body with connector cord.
Once, centered secure the faucet to the counter by
tightening the circle nut under counter until the
faucet is secure and sufficiently tight.
To connect the faucet
2
1
3
circle nut
Incorrect installation could void your valuable warranty.
Professional installation is recommended.
WARNING
