29
9
10
11
Turn the power button to the "ON" position
on the back of the ionizer.
- The power button is ALWAYS left on.
Water supply
Supply water by opening the water supply valve.
Initial operation
Start water flow through your ionizer.
- Press the button on the top of your faucet to start the water flow.
1
2
3
Join the wire from the faucet to the Connect Wire(Harness).
Plug the Connector Cord into the Connector Port on the top of the ionizer.
Connect the power cord into an appropriate outlet.
Make sure the outlet you plug your ionizer into is always live You must use a
nonswitched outlet under the sink where you are installing the ionizer.
Power to the ionizer must always be on.
OFF
ON
- The water may initially come out discolored (light to charcoal gray) due to carbon
particulates in the new filter.
- This is not harmful and is typical of all carbon filters.
Allow the water to flow for 2-3 minutes in the "Filtered" mode and this will flush all
the carbon dust.
NOTE
