Aquatic AquaFit 16, Руководство пользователя

Страница: 9 / 30

Aquatic Fitness System - Owner’s Manual
6
6. Remove the filter
baskets and the
foam blocks
securing the
filters.
7. Remove one of
the two filters
from the pool side of the system. (If you
have the Dual-Temp model with
separate built-in spa, also remove the
filter from the spa side). (If you need
more details on how to remove the
filters, see the Filter Cleaning section,
pg. 23)
8. Ensure that the hose
bibs are closed before
filling the spa. The
hose bibs are connected to hoses in
the equipment
compartment. Turn the
handles on the side of
the valve perpendicular
to the pipe to close the hose
bibs.
9. Place a garden hose in
the empty filter canister to
fill the system. Fill the
system until the water level reaches the
center of the tile line.
NEVER run your spa’s pumps without the filters in place. This can cause damage to
the pumps.
10. Once the swim spa is filled, turn on the GFCI
circuit breaker. Your swim spa’s Upper Control
Panel will turn on. It will take about 30 seconds
for the Upper Control Panel to go through its
start-up screens. When the screen reads the
current temperature with no other messages or
flashing lights, push the JETS Button to start
the jet pump. Push JETS 1, JETS 2, and JETS
3. For the spa part of the AFS 19 DT push on
JETS 1.
Closed
Opened