Aquatic AquaFit 16, Руководство пользователя

Страница: 17 / 30

Aquatic Fitness System - Owner’s Manual
14
Cleaning Your Control Panel
If the control panel needs to be cleaned, using baking soda and water is recommended.
Do NOT use caustic cleaners such as “409,” ammonia based
cleaners such as “Windex,” citrus based or alcohol based
cleaners.
Adjusting Backlight
Settings
Push the Level or Duration button to bring up that
item’s adjustment screen. Use the left and right
arrows on the 5-Key Context Keypad to adjust
backlight brightness and how long the light stays
on. Press Accept to save the changes.
Vision
From the Settings menu, push the Vision button to
bring up the Vision adjustment screen. Use the up
and down arrows on the 5-Key Context Keypad to
indicate if a Vision cartridge is installed. Press
Accept to save the changes.
Maintenance
From page 2 of the Settings menu, push the
Maintenance button to bring up the Maintenance
Reminder adjustment screen. Use the up and
down arrows on the 5-Key Context Keypad to
choose if the spa will display maintenance
reminders. Press Accept to save the changes.
Press Back to go back to the previous menu and
cancel the changes.
System Reset
The system reset menu resets all parameters to
the factory defaults. To proceed and reset all
settings, press Reset. To go back and keep your
settings, press Back.
Reminders
Occasionally, a maintenance reminder will appear
on the screen. Some messages have an arrow
below the last line; push Down on the 5-Key
Context Keypad to read the remainder of the
message. After the requested action is performed,
push Done. To have the system remind you again
later, push the Snooze button.
Warnings
If there is a warning light on the display screen, the
swim spa has detected a problem in the spa.
DO
NOT ENTER THE WATER IF A WARNING
MESSAGE IS DISPLAYED.
Perform the
suggested actions and if the problem persists,
contact your local dealer for service.